引用本文:
【打印本页】   【HTML】   【下载PDF全文】   查看/发表评论  【EndNote】   【RefMan】   【BibTex】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 477次   下载 246 本文二维码信息
码上扫一扫!
分享到: 微信 更多
低频磁场对堆焊层组织及耐磨性的影响
常云龙, 李敬雅, 杨殿臣, 金巍
沈阳工业大学先进焊接技术及自动化省级重点实验室, 沈阳 110870
摘要:
通过对低频纵向磁场作用下埋弧堆焊焊缝成形、硬度、耐磨性及微观组织分析,研究了低频磁场对熔敷金属的组织和力学性能的影响规律,探讨了低频磁场改善熔敷金属组织形态、提高堆焊层耐磨性的机理.试验发现,加低频纵向磁场后焊缝的熔宽增加,熔深略有减少;晶粒尺寸由25.6μm降低到10.6μm,硬度由50.5HRC提高到55.0HRC,磨损量由0.035 g降低到0.015 g.结果表明,外加低频纵向磁场可以有效地细化晶粒,提高堆焊层硬度及耐磨性等力学性能.
关键词:  低频磁场  埋弧堆焊  晶粒细化  耐磨性
DOI:
分类号:
基金项目:沈阳市人才基金资助项目(2008030103055);沈阳市重点基金资助项目(1071201-1-00);辽宁省教育厅重点实验室基金资助项目(2009S072)
Influence of low frequency magnetic field on microstructure and wear resistance of submerged arc welding cladding
CHANG Yunlong, LI Jingya, YANG Dianchen, JIN Wei
Liaoning Province Advanced Welding Technology and Automation Key Laboratory, Shenyang University of Technology, Shenyang 110870, China
Abstract:
The effect of low-frequency longitudinal magnetic field on microstructure and mechanical properties of deposited metal of submerged arc hardfacing was studied by analysing the weld formation,hardness,wear-resisting property and microstructure of the deposited metal.The action mechanism of low-frequency magnetic field to improve the microstructure of the deposited metal and the wear-resisting property of hardfacing layer was discussed.The experiments show that low-frequency longitudinal magnetic field makes the welding pool width increase,welding penetration slightly reduce,the crystal grain be refined from 25.6 μm to 10.6 μm,the hardness increase from 50.5 HRC to 55.0 HRC and the wear rate decrease from 0.035 g to 0.015 g.So the low-frequency longitudinal magnetic field can refine the crystal grain effectively and improve hardness and wear-resisting property of hardfacing layer.
Key words:  low-frequency longitudinal magnetic field  submerged arc hardfacing  grain refinement  wear resistance